DATASHEET · SIDE BY SIDE
Proto-pasta HTPLA vs Polymaker PolyLite ASA
Measured wins
| Spec | Proto-pasta HTPLA | Polymaker PolyLite ASA |
|---|---|---|
| Overview | ||
| Material | PLA | ASA |
| Manufacturer | Proto-pasta | Polymaker |
| Diameter | 1.75 mm | 1.75 mm |
| Thermal | ||
| Print temp | 205–240°C | 240–260°C |
| Bed temp | 40–60°C | 75–95°C |
| Warping | low | high |
| Quality | ||
| Layer adhesion | 4/5 | 4/5 |
| Bed adhesion | 4/5 | 3/5 |
| Stringing resistance | 4/5 | 4/5 |
| Verdict | ||
| Overall rating | 4.3/5 | 4.3/5 |
| Price / kg | — | — |
VERDICT
ASA gets you heat resistance without an annealing step, but needs an enclosure. HTPLA prints on any machine and moves the heat problem to a post-process.