Bambu Lab PLA Glow

What it is for

PLA Glow contains luminous powder for nameplates, jewelry and decorative models that glow in low light. Bambu’s HEX references describe the daytime color. They do not measure glow brightness or show the appearance of an illuminated print.

Printing requirements

Bambu recommends 190 to 230°C at the nozzle and a 35 to 45°C bed with adhesive. Avoid 0.2 mm nozzles. Bambu requires a hardened nozzle for regular use and warns that AMS use can accelerate internal wear. AMS lite is incompatible. The drying table lists 55°C for eight hours.

Choosing this material

The manufacturer notes that luminous intensity fades with time. Check a physical sample when the night-time effect matters more than the daytime color.

Compare Bambu Lab PLA Basic for another option. This reference uses manufacturer documentation; it has no hands-on rating.