Carbon fiber
Bambu Lab PPS-CF
Manufactured by Bambu Lab
DATASHEET
MATERIAL PPS
DIAMETER 1.75 mm
NOZZLE TEMP 310 340 °C
BED TEMP 100 120 °C
SPOOL Varies by option
WARPING Not assessed
REVIEW NOTES
What it is for
PPS-CF is carbon-fiber-reinforced polyphenylene sulfide for specialized engineering parts. Bambu reports high heat and chemical resistance, with a separate flammability test report. Those material figures do not certify a finished component or an assembly.
Printing requirements
Bambu recommends 310 to 340°C at the nozzle and a 100 to 120°C bed with adhesive. The cited product page specifies X1E printing, a hardened steel nozzle and a 60 to 90°C chamber. Neither AMS nor AMS lite is supported. Drying guidance is 100 to 140°C for eight to twelve hours. This is outside ordinary PLA printer requirements.
Choosing this material
Bambu directs purchases through authorized resellers. The manufacturer reference is not a direct checkout offer.
Compare Bambu Lab PPA-CF for another option. This reference uses manufacturer documentation; it has no hands-on rating.
Color references
Manufacturer-published colors. Printed appearance varies with lighting and finish.
Build a palette COMPARE
- Bambu Lab PPS-CF vs bambu ppa cf : PPS-CF requires a 310 to 340°C nozzle range, above PPA-CF's range. Check printer capability before comparing material performance.
SOURCES