Standard
Bambu Lab Support for ABS
Manufactured by Bambu Lab
DATASHEET
MATERIAL Support
DIAMETER 1.75 mm
NOZZLE TEMP 240 270 °C
BED TEMP 80 100 °C
SPOOL Varies by option
WARPING Not assessed
REVIEW NOTES
What it is for
Support for ABS is a dedicated support material for ABS prints. Bambu describes a removable interface that improves the surface where support contacts the model. It is not intended to replace ABS as the model material.
Printing requirements
Bambu recommends 240 to 270°C at the nozzle and a 80 to 100°C bed with adhesive. AMS is supported, while AMS lite is not. Bambu’s settings table lists drying at 80°C for four hours. Use the support-interface settings supplied by the manufacturer and check the ABS model filament’s own enclosure and plate requirements.
Choosing this material
Select the model material first, then its compatible support interface. Matching color does not establish compatibility.
Compare Bambu Lab Support for PLA/PETG for another option. This reference uses manufacturer documentation; it has no hands-on rating.
Color references
Manufacturer-published colors. Printed appearance varies with lighting and finish.
Build a palette COMPARE
- Bambu Lab Support for ABS vs bambu support for pla petg : Support for ABS is matched to ABS. Support for PLA/PETG is matched to lower-temperature PLA and PETG work; they are not universal substitutes.
SOURCES