Standard
Bambu Lab Support for PA/PET
Manufactured by Bambu Lab
DATASHEET
MATERIAL Support
DIAMETER 1.75 mm
NOZZLE TEMP 280 300 °C
BED TEMP 80 110 °C
SPOOL Varies by option
WARPING Not assessed
REVIEW NOTES
What it is for
Support for PA/PET is the breakaway interface material formerly called Support G. Bambu recommends it for materials including PAHT-CF, PA6-CF and PET-CF. It is intended for support interfaces, not standalone models.
Printing requirements
Bambu recommends 280 to 300°C at the nozzle and a 80 to 110°C bed with adhesive. AMS is compatible; AMS lite is not. Keep it dry during printing. The settings table lists 80°C for twelve hours of drying, while the tips section says eight hours; check the current drying instructions for the chosen setup.
Choosing this material
Bambu recommends removing support within two hours after printing to reduce sticking as the material absorbs moisture.
Compare Bambu Lab Support for ABS for another option. This reference uses manufacturer documentation; it has no hands-on rating.
Color references
Manufacturer-published colors. Printed appearance varies with lighting and finish.
Build a palette COMPARE
- Bambu Lab Support for PA/PET vs bambu support for abs : Support for PA/PET serves engineering PA and PET materials and uses a higher nozzle range. Support for ABS is matched specifically to ABS.
SOURCES