DATASHEET · SIDE BY SIDE
Inland PLA+ vs SUNLU PLA+ 2.0
From the Inland PLA+ review: Both are budget PLA+ formulations with similar toughness. SUNLU flows better at high speed; Inland is cheaper again if you have a Micro Center nearby.
Measured wins
| Spec | Inland PLA+ | SUNLU PLA+ 2.0 |
|---|---|---|
| Overview | ||
| Material | PLA | PLA |
| Manufacturer | Inland | SUNLU |
| Diameter | 1.75 mm | 1.75 mm |
| Thermal | ||
| Print temp | 205 to 225°C | 205 to 220°C |
| Bed temp | 45 to 60°C | 50 to 60°C |
| Warping | none | none |
| Quality | ||
| Layer adhesion | 4/5 | 4/5 |
| Bed adhesion | 4/5 | 4/5 |
| Stringing resistance | 4/5 | 4/5 |
| Verdict | ||
| Overall rating | 4.3/5 | 4.4/5 |
| Price / kg | — | — |
How they differ on the data
Inland PLA+ runs 2°C hotter on the nozzle (window midpoints 215°C and 213°C), and the two windows share 15°C of range, so one profile can cover both. Inland PLA+ lists the wider window (20°C against 15°C). SUNLU PLA+ 2.0 runs 2°C hotter on the bed (window midpoints 53°C and 55°C), and the two windows share 10°C of range, so one profile can cover both. Inland PLA+ lists the wider window (15°C against 10°C).